EdgeReset Console

●CHECKING…

Add EdgeReset Device

Scan a device QR code on the device label, or enter device details manually.

Bulk Actions

0 selected

This Phone / PC

Name shown on site gateways when this phone or computer connects. Required before pairing with any gateway.

Phone / PC label

Gateway Management

Your paired site gateways. Set active, sync devices, edit details, or test each connection.

1. Start the EdgeReset Gateway app on the host PC.
2. Open the gateway log page and click Generate Pairing QR.
3. Scan that QR — or enter the gateway URL and pairing code manually.

How it works

Each site runs an EdgeReset Gateway on an always-on Windows PC. This Console App pairs with that gateway to inventory EdgeReset devices and send reset commands over the site network.

1 · Install the gateway

Run EdgeReset_Gateway.exe on a PC on the same network as your devices. On its admin page, give the site a display name.

2 · Pair this Phone / PC

In Settings → This Phone / PC, save a label.
On the gateway’s Devices page, click Generate Pairing QR.
In Settings → Gateway Management → Add New, scan that QR (or enter the URL and code).

3 · Add & manage devices

Tap ↺ Sync on a gateway card to pull that site’s inventory.
On Scan, scan a device’s QR — or enter it manually — to add it.
On Devices, tap a device to edit, or select devices for bulk reset and export.

Tip: The header badge shows gateway status. You must be on the site network to sync or reset — unless the gateway is set to remote access.

Version Information

App version

Gateway version—

Requires gateway v or newer

What this app does

EdgeReset Console helps technicians inventory EdgeReset devices (CN-IMCG0101P-ER, CN-IMCG0201P-ER), store install photos and notes, and remotely power-cycle connected PoE cameras by sending reset commands through the site gateway.

The gateway PC is the source of truth for each site’s device list. This website keeps a local copy in your browser and syncs changes via the gateway’s v2 device API.

Console tabs

Scan — QR scanner, manual device entry, device detail, reset, photos, and notes before saving to the list.
Devices — all saved devices grouped by gateway; select multiple for bulk reset, local delete, or JSON export; tap a device to edit.
Settings — this Phone / PC label, Gateway Management (saved gateways: set active, edit, test, sync, remove; and pair new gateways), and version info in this About tab.

Multiple gateways

You can save more than one site gateway. The active gateway is used for new scans, sync-with-gateway, and quick resets. Each gateway card shows its own connection status. Removing a gateway pairing also removes its devices from this device’s list (local only — devices remain on the gateway until an admin deletes them there).

Gateway status badge

● CONNECTEDGateway reachable and token accepted — sync and resets allowed per access mode

● NOT ON SITE NETWORKGateway is up but you are off the LAN — connect to site Wi‑Fi (unless gateway is in remote mode)

● TOKEN INVALIDSaved token was rejected — re-pair under Settings → Add New Gateway

● GATEWAY UNREACHABLEGateway not running, wrong URL, tunnel down, or firewall blocking access

● NOT CONFIGUREDNo gateway paired yet — complete setup under Settings

Sync & device fields

Sync pulls the authoritative list from the gateway, pushes your pending changes, and registers new devices. Use it after pairing or when another technician updated the site inventory.
Editable after sync: label, location, notes, endpoint IP, photos (up to 12 per device). Product S/N and P/W lock after the device is registered on the gateway — change those on the gateway admin Devices page if needed.
Reset commands use Wake-on-LAN UDP ports 7 or 9 only, to a site broadcast or private LAN address (default 255.255.255.255).
Endpoint IP is optional — the IP of the camera or endpoint behind the converter (IPv4 or IPv6).
Delete in this app hides a device locally only. To remove it from the site permanently, delete it on the gateway admin Devices page.

Your data

Devices, photos, and settings are stored locally in this browser (IndexedDB). Clearing site data or using another browser starts fresh.
Your active gateway is the source of truth — on a new device or browser, re-pair and Sync to restore the site's device list.
This app: v · gateway compatibility is shown in the Version Information card above.

Site gateway admin (on the PC)

The gateway includes browser admin pages: Log (events, pairing QR, allow-list), Devices (site inventory, admin edit/delete), and Settings (display name, access mode). Gateway package version — see gateway documentation for install and API details.